|
20ft Iron Man Windmill powering two windmill pumps, circulating water through a large real estate development. The smaller windmill water pump is 12in (0.3M) in diameter and lifts water 20ft (7M) from a lake to fill the system. The second windmill water pump is 28in (0.7M) in diameter and lifts water 7ft (2M) and can pump more than 200 tons (metric) of water per hour in strong winds.
|
High capacity Iron Man windmill water pump built for the Nanjing University of Environmental Science. Able to lift up to 215 tons (M) of water per hour 2M in elevation. Water is lifted from a river for a large aqua culture project in Jiangsu, China. This is an innovative demonstration of how windmill water pumps are being used to improve agriculture and the environment.
|
Large Iron Man windmill pumps of this type provide new capability and new opportunities for applications like agricultural drainage, removing water from drain and tile lines, filling lakes and ponds, all with the free power of the wind. Wind speed in this video is 5 mph (8.6 kph)
|
|
20ft Iron Man Windmill used to fill two irrigation reservoirs. Pumping elevation to the lower reservoir is 20ft (6M). This windmill fills the lower reservoir in three days of medium level winds. Water overflows from the reservoir and can be seen traveling across the countryside irrigating fields. Water is lifted 40ft (12M) to the second reservoir by capping the lower outlet. A substantial amount of water is lost through leakage of the old cement and dirt ditch, yet the reservoir is still able to be filled.
|
5000 head of cattle and horses get their water from two 8ft - 2.4M diameter Iron Man water pumping windmills on a 30,000 Hectar (75,000 acre) ranch in Kazakhstan.
|
Large Iron Man windmill pumps provide new capability and new opportunities for improving agriculture. This system on the Coon Family Farm (Oak Park Farm), Shedd, Oregon, is used for agricultural drainage, removing water from a tile line agricultural drainage system. Note: Outlet pipe is not installed in this video.
|