IRON MAN WINDMILL CO.
WE SHIP WORLDWIDE
Iron Man Windmill Co. LTD. 11575 So West Pacific Hwy, No. 126, Tigard Oregon, 97223 - Oregon Office 1-541-359-0859
Email: [email protected]
PRICING FOR IRON MAN 702 WINDMILLS, TOWERS AND ACCESSORIES
2017 - A - pricing subject to change.
ABOUT IRON MAN WINDMILL CO.
We are the originators of wind powered agricultural pumps and are the only company in the world today that specializes in the design and manufacture of wind powered agricultural pumps.
Through a great amount of hard work, Iron Man Windmill Co. has become the worlds leading experts with wind powered pumps. Iron Man Windmills and pumps are hard at work irrigating and draining agricultural lands, providing water for homes and livestock, filliing lakes and resevoirs and pumping from wells shallow and deep. Iron Man Pumps are original innovations of the Iron Man Windmill Co. and provide a wide range of new and significantly improved capability. Iron Man Pumps use modern materials and design that reduce friction, reduce loading of the windmill, increase working life and pump more water.
ABOUT OUR WINDMILLS
Our windmills come complete with all parts used at the top of the tower. Towers come complete with all parts required to support and use the windmill, including anchors and shut off mechanism. Tower pump rod (pump pole) with our special linear guides are provided when required. Agricultural Pumps come complete with well pipe, pump rod, our linear pump rod guides, standard mounts, and short discharge pipe with outlet flange set with seal and fasteners. Custom mounts are built to order at extra cost. All fasteners required are provided and are hot galvanized forged alloy steel. Small fasteners are stainless steel.
When windmill, tower and (standard) Agricultural pumps are ordered, no other hardware is needed except for inlet and discharge piping. Well pumps require pump rod and well pipe listed below.
Prices are FOB factory and include export packing. Prices do not include any national, regional or local taxes, VAT or import duty and are FOB factory door. Regional pricing may vary. We provide attractive transportation rates worldwide. Shipping credits may be applicable for full container orders. Details provided on request.
IRON MAN WINDMILLS
complete with all parts used at top of tower
Weight Factory List
8ft - 2.4M IRON MAN WINDMILL - Uses No. 1 pump rod 150kg $1,995
12ft - 3.6M IRON MAN WINDMILL - Uses No. 2 pump rod 465kg $5,495
16ft - 4.8M IRON MAN WINDMILL - Uses No. 3 pump rod 1,065kg $11,549
20ft - 6M IRON MAN WINDMILL - Uses No. 4 pump rod 2,200kg $26,889
TOWERS for Ø2.4M (8ft) 702 windmill Weight Factory List
27ft - 8M HEAVY STEEL 4-LEG TOWER - 8M tall 250kg $2,063
39ft - 12M HEAVY STEEL 4-LEG TOWER - 12M tall 356kg $2,513
53ft - 16M HEAVY STEEL 4-LEG TOWER - 16M tall 470kg $3,338
67ft - 20M HEAVY STEEL 4-LEG TOWER - 20M tall 665kg $4,493
80ft - 24M HEAVY STEEL 4-LEG TOWER - 24M tall   860kg $5,499
ST-8 STUB TOWER WITH PLATFORM 2M tall
W/ Galvanized Steel Platform and hardware
72kg $563
TOWERS for Ø3.6M (12ft) 702 windmill Weight Factory List
27ft - 8M HEAVY STEEL 4-LEG TOWER - 8M tall 400kg $3,150
39ft - 12M HEAVY STEEL 4-LEG TOWER - 12M tall 550kg $3,735
53ft - 16M HEAVY STEEL 4-LEG TOWER - 16M tall 750kg $5,100
67ft - 20M HEAVY STEEL 4-LEG TOWER - 20M tall 980kg $6,225
80ft - 24M HEAVY STEEL 4-LEG TOWER - 20M tall 1,270kg $7,875
ST-12 STUB TOWER WITH PLATFORM 2M tall
W/ Galvanized Steel Platform and hardware
101kg $810
TOWERS for Ø4.8M (16ft) 702 windmill Weight Factory List
27ft - 8M HEAVY STEEL 4-LEG TOWER - 12M tall 575kg $4,350
39ft - 12M HEAVY STEEL 4-LEG TOWER - 12M tall 893kg $5,213
53ft - 16M HEAVY STEEL 4-LEG TOWER - 16M tall 1,170kg $6,863
67ft - 20M HEAVY STEEL 4-LEG TOWER - 20M tall 1,545kg $9,000
80ft - 24M HEAVY STEEL 4-LEG TOWER - 24M tall 2,025kg $11,750
ST-16 STUB TOWER WITH PLATFORM 4M tall
W/ Galvanized Steel Platform and hardware
165kg $1,313
TOWERS for Ø6.0M (20ft) 702 windmill Weight Factory List
39ft - 12M HEAVY STEEL 4-LEG TOWER - 12M tall 1,650kg $13,992
53ft - 16M HEAVY STEEL 4-LEG TOWER - 16M tall 2,132kg $16,720
67ft - 20M HEAVY STEEL 4-LEG TOWER - 20M tall 2,680kg $20,240
80ft - 24M HEAVY STEEL 4-LEG TOWER - 24M tall 3,380kg $25,080
92ft - 28M HEAVY STEEL 4-LEG TOWER - 24M tall 4,930kg $31,592
ST-20 STUB TOWER WITH PLATFORM 4M tall
with Galvanized Steel Platform and hardware
468kg $3,960
PUMPS
IRON MAN WINDMILL PUMPS reflect years of testing and improvement. Modern materials and manufacturing techniques are used throughout. Growing in popularity by providing the highest quality pump on the market today that honestly pumps considerably more water than pumps made of copper based alloy or pumps using old-fashioned and obsolete leather pump seals. Leather seals are well documented to waste 40% to 60% of the available pumping energy due to seal friction loss. Iron Man Polyseals work very smoothly having little friction significantly reducing the load and wear and tear on the windmill mechanism. The windmill works in lighter winds, turns more easily, pumps more water and lasts longer. It's a simple fact.
Diameter Millimeter Inch Equivalent Working Stroke Well Pipe Open Top Well Pipe Closed Top Weight Kg Factory List
25 1" 20" - 0.5M 1-1/4" NA 1 $167
32 1-1/4" " 1-1/4" NA 2 $194
40 1-1/2" " 1-1/2" 1-1/4" 3 $255
50 2" " 2" 1-1/2" 5 $334
60 2-1/4" " 2-1/2" 2" 6 $415
80 3-1/4" " 4" 3" 12 $543
100 4" " 4" 3" 18 $681
125 5" " 6" 3" 28 $854
150 6" " 6" 4" 40 $1,029
200 8" " 8" 6" 71 $1,377
250 10" " 10" 6" 112 $1,728
300 12" " 12" 8" 161 $2,081
350 14" " 14" 8" 219 $2,436

400 16"
IRON MAN AGRICULTURAL PUMPS
Iron Man Agriculture Pumps lift large amounts of water dependably and are an original Iron Man Windmill innovation. They are commonly used for high capacity agricultural irrigation, agricultural drainage and ground water remediation. Pricing shown is for standard agriculture pump configuration. Custom support structure, when needed, custom inlet and outlet designs, stand pipe with fittings and supports are available at extra cost. AG pump pricing includes well pipe and flanged outlet to ground level. All AG Pumps come with flanged connections and an extra flange with fasteners and gasket to complete connection to delivery pipe. They are built to order and shipping time can vary typically from one to three months. They can be built to fit installations based on our standard designs or a wide range of customization is to suit nearly any application. Full details are available on application.
$2,795
450 18" $3,155
500 20" $3,519
550 22" $3,885
600 24" $4,253
700 28" $4,980
800 32" $5,711
900 36" $6,448
1000 40" $7,190
1100 44" $7,937
1200 48" $8,689
1300 52" $9,446
1400 56" $10,208
1500 60" $10,976
1600 64" $11,748
1700 68" $12,526
1800 72" $13,308
1900 76" $14,096
2000 80" $14,889
1. 304 STAINLESS STEEL is used in all parts of pumps except for seals and valves in all pumps with diameters from Ø25mm to Ø350mm. No steel parts are used. Seal and valve materials are Polyethylene, Viton, Delrin and Polyurethane - all well proven materials with long working life and highly resistant to cracking.
2. MILLIMETER CYLINDER ID SIZES are standard as shown. Inch equivalent is a close approximation and is for reference and to determine suitable substitution size. The inch equivalent is close enough to be useful for estimating pumping capacity.
3. PIPE THREADS used are NPT unless specified otherwise and are standard on all pumps Ø100mm (4") and smaller. Most other other thread types are available when specified with order. Check with factory for details on the use of other thread types.
4. PIPE FLANGES are standard on all pumps Ø125mm and larger. All flanged pumps come with extra matching flange with hot galvanized forged alloy steel fasteners and gasket.
5. PISTONS: Come standard with three Iron Man Polyseals. And are proven for applications lifting water up than 200ft - 60M. For higher pumping elevations up to 400ft - 120M, a four seal piston should be used. Add 10% for pumps with a four seal piston. Special seals and pumps are available for lifting water up to 1500ft - 450M. Please consult factory for details. AG pumps come standard with two heavy duty Polyseals.
6. WELL PUMPS: Used in drilled and dug wells 4" diameter and larger. 4" diameter wells are small and restrict the size of pump and windmill that can be used. This is a problem when attempting to lift large amounts of water short pumping elevations when it is desirable to use large diameter pumps. Pumps must always be at least 25mm smaller than the well diameter and more clearance is desirable. OPEN TOP PUMPS are desirable in deep wells and are always preferable in any well, even though well pipe cost is higher. The ability to remove the pump piston for servicing without removing the well pipe is desirable as long as the cost of well pipe does not become prohibitive. CLOSED TOP PUMPS allow the use of smaller diameter well pipe, reducing cost. The smaller diameter well pipe prevents the servicing of pump parts unless the entire pump, pump rod and well pipe string is removed. Also, the use of smaller well pipe increases the resistance to the movement of water and this increased load results in less water being pumped. Still the practice of using closed top pumps is common in many regions where pumping elevations are not significant. Closed top pumps should never be used when placed more than 100ft (30M) deep in wells. The belief held by some that smaller diameter well pipe reduces the load on the piston and hence the windmill is erroneous. The smaller diameter pipe actually increases the load on the windmill and results in less water being pumped. In fact, due to reduced friction, the larger pipe used with open top pumps reduces the load in the piston / windmill and certainly will pump more water and work spend more time working in light winds.
PUMP ROD - Airtite 13ft - 4M Lengths Weight Factory List
No. 1 PR Pump Rod for Ø8ft - Ø2.4M windmill - 4M (13.0ft) long each 5.5kg $34
No. 2 PR Pump Rod for Ø12ft - Ø3.6M windmill - 4M (13.0ft) long each 8.4kg $50
No. 3 PR Pump Rod for Ø16ft - Ø4.8M windmill - 4M (13.0ft) long each 11kg $67
No. 4 PR Pump Rod for Ø20ft - Ø6M windmill - 4M (13.0ft) long each 16kg $100
PUMP ROD SEALS Weight Factory List
No. 1 PRS For 8ft (2.4M) Windmills - 7/16" NC or M12 6kg $279
No. 2 PRS For 12ft (3.6M) Windmills - 5/8" NC or M16 6kg $279
No. 3 PRS For 16ft (4.8M) Windmills - 7/8" NC or M20 7kg $420
No. 4 PRS For 20ft (6.0M) Windmills - 1" NC or M24 9kg $520
HAND PUMP Weight Factory List
No. 1 HP Minimum Order - 2 35kg $452
AERATION AND SHOP COMPRESSORS
Iron Man Windmill Co. can provide high capacity Aeration Compressors - High Capacity, Low Pressure and Shop Air Compressors - High Pressure, Lower Capacity for all our windmills. Please contace us for details.