This 20ft IRON MAN windmill is located 150M - 490 ft. from the spring, which is the source of water. The pump is located at the spring and operated by an IRON MAN remote operating system. This windmill lifts water 170M - 550ft. to a water tank for a village water supply. The tower is anchored to solid rock with heavy rock bolts. A windmill instalation like this is not a job for amatures.    Water pouring out of an 8ft Diameter IRON MAN WINDMILL in northern China. This windmill pumps 1135 gallons (4300 Liters) in two hours. The total lift is 4M. This windmill is used to irrigate 25 acres of farmland.    IRON MAN 8FT WINDMILL   Another IRON MAN WINDMILLused for irrigating farm land in Nothern China

 

WHAT SIZE WINDMILL AND PUMP DO I NEED?

 

You will need to know the following information to determine the proper windmill and pump for your application. 

 

If you plan to pump water from a well with the windmill located directly over your well:

 

1. Diameter of well.

2.The distance to water from ground level.

3. Distance to the bottom of well from ground level.

4. Elevation above ground level you will lift water.

5. Distance from the well you intend to pump water.

6. Amount of water you need on an average daily basis.

7. Average wind conditions at the site as defined below.

  

A. Average number of hours daily that winds blow strongly at your site.

B. Average number of hours daily that you have fair winds at your site.

C. Average number of hours daily that you have low speed winds at your site.

D. Average number of hours daily that the wind is calm at your site.

 

GO TO DESCRIPTION OF WIND CONDITIONS

 

GO TO PUMPING ELEVATION / CAPACITY CHART

 

RETURN TO HOME PAGE

 

 

IRON MAN WINDMILL CO. LTD

 

CONTACT: IRON MAN WINDMILL CO. LTD

 

ALL CONTENT RIGHTS RESERVED WORLDWIDE 2003 - 2008 - IRON MAN WINDMILL CO. LTD